From idea to reality

From Idea to Reality

Innovation, design and craftsmanship are at the heart of Pandora. With every new collection we begin an exciting journey, from inspiration and ideas to selecting high-quality materials and crafting our hand-finished jewelry designs with traditional goldsmith techniques.

PPT_Craftsmanship_3110184725_N212

The creation and crafting of every piece of Pandora jewelry is a carefully orchestrated journey. It involves a special collaboration between skilled designers and craftspeople from the Pandora Global Office and our state-of-the-art crafting facilities in Thailand. With 10 annual collections, Pandora has a unique opportunity to capitalize on global trends in a way that few other jewelry companies can. However, it also requires that each collection is carried by a strong creative idea guided by Pandora’s core design language to expanding and carry our brand to the next level.

Lost Wax Casting

Pandora uses lost wax casting, the ancient crafting technique, to create the metal parts of our jewelry. The lost wax casting process can be used for mass production, making it both economical and affordable. Fine details look beautiful on cast jewelry, making lost wax casting perfect for complex as well as minimalist designs. In this chapter, we highlight some of the important steps and amazing techniques that our hand-finished jewelry piece will go through. Further details are provided within the individual chapters.

Screen_Shot_CMYK

We all have so much power within, and jewelry is a wonderful way to express that power for the world to see.

The production process starts with an idea to begin the creative process and design development

1 Creative Process

Pandora's Design Process consists of six steps that transform ideas into real, tangible prototypes. The first step is the Analytical Process, where trends are identified, consumers deliver feedback and the local market needs are evaluated. The second step is the Creative Process; in this step the design department conceptualizes their ideas by creating mood boards. It is this step where the collection's development, including the direction and expression, begin to unfold. Next, the drawings and illustrations are created during the Sketching Process. During this phase, details are constantly being added, changed and removed.

Screen_Shot_Cork_Board_CMYK
6_CMYK

Drawing inspiration from an age that transformed the role of women, the essence of the Renaissance is reimagined for a new generation of women to reflect their creativity and personality.

Designing Pandora Reflexions. Francesco Terzo & A. Filippo Ficarelli, VP Creative Directors, Pandora

Our two VP designers behind the scenes, preparing for the Pandora Reflexions™ model photo shoot.

2 Design & Sample Development

After Sketching comes the Pre-Production Process. In this stage, production facilities are engaged to ensure they can transform all of the new ideas into protoypes. After the first few prototypes are created, there are sometimes revisions to the original to ensure the proportions or perspectives are just right. The revision stage is called the Drawing Deadline. The entire collection’s prototypes are created at this stage. Based on the initial drawings, a 3D/ CAD computer model is created and, once approved, the drawings and model are used for creating a jewelry master. The final stage of the design process is called Product Board, where the final designs are selected by regional representatives to be included in the collection.

AU18_SPS_REFLEXIONS_02_BRACELET_SHADOW_CMYK
AU18_SPS_REFLEXIONS_08_4xCHARMS_SHADOWS_CMYK

The final product (Pandora Reflexions™ shown) undergoes hundreds of changes and adjustments before the design is finalized.

... when the design development is finished, the lost wax casting process begins.

3 Rubber Mold Cutting

Next, we create a rubber mold by pressing several layers of rubber around the jewelry master and then vulcanizing the form in a special machine called a vulcanizer. This chemical process, named after the Roman god of fire, Vulcan, converts natural rubber into a more durable material through the use of sulfur. The jewelry master is then cut away, leaving behind a rubber mold with an identical hollow impression.

4 Wax Model

The rubber mold is injected with molten wax – two metal plates are pressed on either side of the mold to prevent the wax from floating out – which hardens into exact copies of the original jewelry master. The wax model rests to cool for a few minutes before removing from the rubber mold. Each rubber mold is very efficient; it can be reused up to 2,000 times.

PAN_CORP17_0189_0516_N21_CMYK
PAN_CORP16_0024_0516_N21_CMYK

5 Treeing

The wax model is cleaned and attached to a wax tree with a burner, adding more wax models until the tree is full.

6 Burnout Ovens

The wax trees are then placed into metal cylinders to create plaster molds. The cylinders are filled with liquid gypsum and heated in a burnout oven for several hours, baking the gypsum into a hard plaster and melting and evaporating the wax. The process leaves chambers in the plaster shaped as the jewelry master.

Burnout_oven_N21
PAN_CORP16_0039_0516_N21_CMYK

7 Casting

The plaster molds then go into a casting machine and silver or gold alloy is poured. The metal alloy melts down into the forms, replicating the jewelry master

8 Cleaning

When the plaster casts have cooled down, the metal trees are removed from inside and cleaned to remove any residue.

_L4D5368_N21_CMYK
_L4D4291_N21_CMYK

9 Cutting

The jewelry forms are cut from the tree. Any surplus metal is refined and reused.

10 Grinding

To prepare the metal for further adornment and refinement by our goldsmiths or stone setters, a rough polish is applied to smooth out uneven areas.

PAN_CORP17_0006_1116_N21_CMYK
PAN_CORP17_0273_1116_N21_CMYK

11 In-Line Quality Control

There are many quality control checkpoints during our crafting process, depending on the crafting facility. The first check usually performed during this step.

12 Assembling, Soldering & Stone Setting

Pandora’s skilled goldsmiths adorn and detail our jewelry designs using a variety of crafting techniques. Different elements are assembled and soldered to create the finished masterpieces. Design details including fitting clasps on bracelets and necklaces, soldering bails on dangles, adding metal cores inside glass and stone charms, or silicone grips inside clips, and creating adorable movable features on Pandora Friends charms are done during this step. Stones are set, either by hand or in the wax model, using many classic settings which secure and showcase their beauty.

_L4D2781
3_1_Grey_BG_CMYK_nr

13 Polishing & Tumbling

Every piece of jewelry is polished beautifully before the most important quality control check. The jewelry is placed in a special tumbler machine to smooth and buff the surface before ultrasonic cleaning removes any residue.

14 Finishing

This step creates different surface effects on metals, such as high shine, satin effects and diamond pointing, to create a spectacular texture that is both matte and brilliant without using stones. This technique originated in the 17th century and was updated in the last century, and utilizes a diamond-pointed tool to prick the surface of the metal to create the effect.

6_6_CMYK_N21

Each Pandora piece is touched by an average of 30 pairs of hands during the crafting process.

Oxidized_2_N21_CMYK

15 Oxidation & Plating

In this step, special finishes are added to select high-quality metals to create different tones and contrasts. Finishes include oxidization, e-coating (electric coating) and plating on metals, such as 18k gold-plated sterling silver (Pandora Shine™), our 14k rose gold-plated unique metal blend (Pandora Rose™), and rhodium-plated sterling silver. Please read the “Metal Plating” chapter for more information.

16 Enameling & Gluing

Enameling is a decoration often used on Pandora jewelry. Colors are mixed in-house and the glossy, hard wearing enamel is applied to the jewelry by hand using a thin needle, or by hand-painting it for shaded enamel effects. Freshwater cultured pearls and lacquered artificial pearls are also set by hand, carefully glued onto traditional peg settings. These processes always take place after polishing and tumbling.

PAN_CORP17_0010_1116_WHITE_N21_CMYK
PAN_CORP18_0011_1217_N21_CMYK

17 Final Quality Control

All pieces of jewelry go through a vigorous quality control process, and here we give the final approval that the specific product embodies Pandora's strict quality standards.

18 Packing & Shipping

The final step is packing the hand-finished Pandora jewelry and shipping it around the world, ready for women to wear, style and cherish.

PAN_CORP17_0289_0916_N21_CMYK
_K9A6387_nov.21_2016_N21

The rubber mold is injected with molten wax and hardens into exact copies of the original jewelry master. The rubber mold can be reused up to 2,000 times.

Explore Our Jewelry

SHOP NOW